Lattice

This is a 3D silicone cylinder ice molds that can be used to make ice cubes. You can use it for various beverages such as cola, juice, coffee, milk tea.
This would be a great gift idea for friends or family who love to make ice.

Material: food grade silicone + ABS
Color: blue green
Mould: about 3.54*3.15*3.35 inches
Ice cubes: about 0.5 inches
Number of ice cubes: 60
Packing List: 1* Ice Bucket

Production steps:
1.Pull out the plastic inner cylinder and pour water into the silicone container, slightly more than 2 grids, not more than 2 and a half grids;
2.Slowly insert the inner cylinder with the cover into the silicone cavity, pays attention to rotate it to the bottom and hold it down, and then gently pinch the silicone side under the cover to vent the inner cylinder to prevent the inner cylinder from floating;
3.Put the molds at room temperature for a few minutes; if you don’t want to wait and press hard, you can pour a proper amount of hot water into the inner cylinder, pour out the hot water for about 10 seconds, and then easily pull out the inner cylinder;
4.Press the outer wall of the silicone to continuously adjust the angle to remove the ice cubes.
5.We recommend freezing for 4-6 hours.

NOTE:
1.Please allow 1-2cm differs due to manual measurement;
2.Due to the lighting effects and shooting angles, the color of the item and that shown in the picture might have a nuance.

INDEPENDENT STORAGE DESIGN - Our mini ice cube maker can be perfectly stacked in the refrigerator, and the effect is very good. This 2-in-1 ice bucket holds up to 60 ice cubes to provide longer cooling time for bottled beverages.
PERFECT LIFE STRESS RELIEF TOOL -After the ice cube is successful, you can squeeze and knead the silicone ice bucket until all the ice cube is poured out, do not worry about the ice bucket variant, and release the stress in your life.
EASY TO USE - Slowly insert the inner cylinder with the cover into the silicone cavity, pay attention to turn it to the end and hold it down, then gently pinch the silicone surface under the cover, so that the inner cylinder is discharged from the float toward the inner cylinder.Size of ice cubes: about 1.5cm*1.5cm*1.5cm.
MULTI-USE - The ice mold can be used in indoor refrigerators, car refrigerators and outdoor mini refrigerators. It is also perfect for various occasions such as dinner parties, birthday parties, picnics, etc. Also great for RV living, camping and other outdoor activities. Simply squeeze the ice tray bucket to easily release ice cubes and ice cup storage.